User`s manual

98 Asanté IntraCore 36000 Series
CLI
The following example displays the LACP configuration settings and operational state for the remote side of
port channel 1.
Console#show lacp 1 neighbors
Channel group 1 neighbors
-------------------------------------------------------------------------
Eth 1/1
-------------------------------------------------------------------------
Partner Admin System ID : 32768, 00-00-00-00-00-00
Partner Oper System ID : 32768, 00-00-00-00-00-01
Partner Admin Port Number : 1
Partner Oper Port Number : 1
Port Admin Priority : 32768
Port Oper Priority : 32768
Admin Key : 0
Oper Key : 4
Admin State : defaulted, distributing, collecting, synchronization,
long timeout,
Oper State : distributing, collecting, synchronization, aggregation,
long timeout, LACP-activity
.
.
.
Console#
7.5 Setting Broadcast Storm Thresholds
Broadcast storms may occur when a device on your network is malfunctioning, or if application programs are
not well designed or properly configured. If there is too much broadcast traffic on your network, performance
can be severely degraded or everything can come to complete halt.
You can protect your network from broadcast storms by setting a threshold for broadcast traffic for each
port. Any broadcast packets exceeding the specified threshold will then be dropped.