User`s manual

84 Asanté IntraCore 36000 Series
SNMP IP Filter List – Configures IP address(es) for the SNMP group.
Telnet IP Filter List – Configures IP address(es) for the Telnet group.
IP Filter List – IP addresses which are allowed management access to this interface.
Start IP Address – A single IP address, or the starting address of a range.
End IP Address – The end address of a range.
Configuring Switch Using the Web or CLI
Web
Click Security – IP Filter. Enter the addresses that are allowed management access to an interface, and
click Add IP Filtering Entry.
CLI
This example allows SNMP access for a specific client.
Console(config)#management snmp-client 10.1.2.3
Console(config)#end
Console#show management all-client
Management Ip Filter
Http-Client:
Start ip address End ip address
-----------------------------------------------
Snmp-Client:
Start ip address End ip address
-----------------------------------------------
1. 10.1.2.3 10.1.2.3
Telnet-Client:
Start ip address End ip address
-----------------------------------------------
Console#