User`s manual

User’s Manual 69
CLI
This example shows the default protocol settings for 802.1x. For a description of the additional entries
displayed in the CLI, See the show dot1x command.
Console#show dot1x
Global 802.1X Parameters
reauth-enabled: yes
reauth-period: 3600
quiet-period: 60
tx-period: 30
supp-timeout: 30
server-timeout: 30
reauth-max: 2
max-req: 2
802.1X Port Summary
Port Name Status Operation Mode Mode Authorized
1/1 disabled Single-Host ForceAuthorized n/a
1/2 disabled Single-Host ForceAuthorized n/a
.
.
.
1/47 disabled Single-Host ForceAuthorized n/a
1/48 enabled Single-Host Auto yes
802.1X Port Details
802.1X is disabled on port 1/1
802.1X is disabled on port 1/2
.
.
.
.
802.1X is disabled on port 1/47
802.1X is enabled on port 1/48
Status Authorized
Operation mode Single-Host
Max count 5