User`s manual
User’s Manual 59
Configuring Switch Using the Web or CLI
Web
Click Security – Authentication Settings. To configure local or remote authentication preferences, specify
the authentication sequence (For example, one to three methods), fill in the parameters for RADIUS or
TACACS+ authentication if selected, and click Apply.
CLI
Specify all the required parameters to enable logon authentication.
Console#show radius-server
Remote radius server configuration:
Server IP address: 0.0.0.0
Communication key with radius server:
Server port number: 1812
Retransmit times: 5
Request timeout: 10
Console#show tacacs-server
Remote TACACS server configuration:
Server IP address: 0.0.0.0
Communication key with tacacs server: green
Server port number: 200
Console#
6.3 Configuring HTTPS
You can configure the switch to enable the Secure Hypertext Transfer Protocol (HTTPS) over the Secure
Socket Layer (SSL), providing secure access (For example, an encrypted connection) to the switch’s web
interface.
6.3.1 Usage Guidelines
Both the HTTP and HTTPS service can be enabled independently on the switch. You cannot configure both
services to use the same UDP port.