User`s manual

User’s Manual 365
Related Commands
show vlan
16.245 vlan
This command configures a VLAN. Use the no form to restore the default settings or delete a VLAN.
Syntax Description
vlan vlan-id [name vlan-name] media ethernet [state {active | suspend}]
no vlan vlan-id [name | state]
vlan-id ID of configured VLAN. (Range: 1-4094, no leading zeroes)
name Keyword followed by the VLAN name.
vlan-name ASCII string from 1 to 32 characters.
media ethernet Ethernet media type.
state Keyword to be followed by the VLAN state.
active - VLAN is operational.
suspend - VLAN is suspended. Suspended VLANs do not pass packets.
Default
By default, only VLAN 1 exists and is active.
Command Mode
VLAN Database Configuration
Usage Guidelines
no vlan vlan-id deletes the VLAN.
no vlan vlan-id name removes the VLAN name.
no vlan vlan-id state returns the VLAN to the default state (For example, active).
You can configure up to 255 VLANs on the switch.
Example
The following example adds a VLAN, using VLAN ID 105 and name RD5. The VLAN is activated by default.
Console(config)#vlan database
Console(config-vlan)#vlan 105 name RD5 media ethernet
Console(config-vlan)#