User`s manual

36 Asanté IntraCore 36000 Series
CLI
Use the following command to display version information.
Console#show version
Unit1
Serial number :A305051234
Hardware version :R0A
Number of ports :24
Main power status :up
Redundant power status :not present
Agent(master)
Unit id :1
Loader version :1.0.0.1
Boot rom version :1.0.0.1
Operation code version :1.1.0.13
Console#
2.10.4 Displaying Bridge Extension Capabilities
The Bridge MIB includes extensions for managed devices that support Multicast Filtering, Traffic Classes,
and Virtual LANs. You can access these extensions to display default settings for the key variables.
Field Attributes
Extended Multicast Filtering Services: This switch does not support the filtering of individual multicast
addresses based on GMRP (GARP Multicast Registration Protocol).
Traffic Classes: This switch provides mapping of user priorities to multiple traffic classes. (Refer to the
section “Number of Egress Traffic Classes” under the section 11.1 Setting the Default Priority for
Interfaces.)
Static Entry Individual Port: This switch allows static filtering for unicast and multicast addresses. (Refer to
8.1 Setting Static Addresses section.)
VLAN Learning: This switch uses Independent VLAN Learning (IVL), where each port maintains its own
filtering database.
Configurable PVID Tagging: This switch allows you to override the default Port VLAN ID (PVID used in
frame tags) and egress status (VLAN-Tagged or Untagged) on each port. (Refer to Chapter 10 Configuring
VLANs.)