User`s manual

334 Asanté IntraCore 36000 Series
Usage Guidelines
The first snmp-server community command you enter enables SNMP (SNMPv1). The no snmp-server
community command disables SNMP.
Example
The following is sample output from the snmp-server community command .
Console(config)#snmp-server community alpha rw
Console(config)#
16.203 snmp-server contact
This command sets the system contact string. Use the no form to remove the system contact information.
Syntax Description
snmp-server contact string
no snmp-server contact
string String that describes the system contact information. (Maximum length: 255
characters)
Default
None
Command Mode
Global Configuration
Example
The following is sample output from the snmp-server contact command.
Console(config)#snmp-server contact Paul
Console(config)#
Related Commands
snmp-server location
16.204 snmp-server enable traps
This command enables this device to send Simple Network Management Protocol traps (SNMP
notifications). Use the no form to disable SNMP notifications.
Syntax Description
[no] snmp-server enable traps [authentication | link-up-down]