User`s manual

User’s Manual 329
16.195 show system
This command displays system information.
Default
None
Command Mode
Normal Exec, Privileged Exec
Usage Guidelines
For a description of the items shown by this command, refer to section 2.10.2 Displaying System
Information.
The POST results should all display “PASS.” If any POST test indicates “FAIL,” contact your distributor for
assistance.
Example
The following is sample output from the show system command.
Console#show system
System description: 44 10/100/1000 ports + 4 Gigabit Combo ports L2/L4 managed
standalone switch
System OID string: 1.3.6.1.4.1.259.6.10.51
System information
System Up time: 0 days, 1 hours, 23 minutes, and 44.61 seconds
System Name : [NONE]
System Location : [NONE]
System Contact : [NONE]
MAC address : 00-30-f1-47-58-3a
Web server : enable
Web server port : 80
Web secure server : enable
Web secure server port : 443
POST result
UART LOOP BACK Test...........PASS
DRAM Test.....................PASS
Timer Test....................PASS
PCI Device 1 Test.............PASS
Switch Int Loopback test......PASS
Crossbar Int Loopback Test ...PASS
Done All Pass.
Console#
16.196 show tacacs-server
This command displays the current settings for the TACACS+ server.
Default
None