User`s manual

322 Asanté IntraCore 36000 Series
line console
!
line vty
!
end
Console#
Related Commands
show startup-config
16.189 show snmp
This command checks the status of SNMP communications.
Default
None
Command Mode
Normal Exec, Privileged Exec
Usage Guidelines
This command provides information on the community access strings, counter information for SNMP input
and output protocol data units, and whether or not SNMP logging has been enabled with the snmp-server
enable traps command.
Example
The following is sample output from the show snmp command.
Console#show snmp
System Contact: Paul
System Location: WC-19
SNMP traps:
Authentication: enable
Link-up-down: enable
SNMP communities:
1. alpha, and the privilege is read-write
2. private, and the privilege is read-write
3. public, and the privilege is read-only
0 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
0 Get-next PDUs