User`s manual
316 Asanté IntraCore 36000 Series
Command Mode
Privileged Exec
Usage Guidelines
This command displays the currently configured source port, destination port, and mirror mode (For
example, RX, TX, RX/TX).
Example
The following is sample output from the show port monitor command.
The example shows mirroring configured from port 6 to port 11:
Console(config)#interface ethernet 1/11
Console(config-if)#port monitor ethernet 1/6
Console(config-if)#end
Console#show port monitor
Port Mirroring
-------------------------------------
Destination port(listen port):Eth1/1
Source port(monitored port) :Eth1/6
Mode :RX/TX
Console#
16.181 show protocol-vlan protocol-group
This command shows the frame and protocol type associated with protocol groups.
Syntax Description
show protocol-vlan protocol-group [group-id]
group- id Group identifier for a protocol group. (Range: 1-2147483647)
Default
All protocol groups are displayed.
Command Mode
Privileged Exec
Example
The following is sample output from the show protocol-vlan protocol-group command.
This shows protocol group 1 configured for IP over Ethernet:
Console#show protocol-vlan protocol-group
ProtocolGroup ID Frame Type Protocol Type
------------------ ------------- ---------------
1 ethernet 08 00