User`s manual

User’s Manual 291
16.150 show gvrp configuration
This command shows if GVRP is enabled.
Syntax Description
show gvrp configuration [interface]
interface ethernet unit/port
unit - This is device 1.
port - Port number.
port-channel channel-id (Range: 1-6)
Default
Shows both global and interface-specific configuration.
Command Mode
Normal Exec, Privileged Exec
Example
The following is sample output from the show gvrp configuration command .
Console#show gvrp configuration ethernet 1/7
Eth 1/ 7:
Gvrp configuration: Disabled
Console#
16.151 show history
This command shows the contents of the command history buffer.
Default
None
Command Mode
Normal Exec, Privileged Exec
Usage Guidelines
The history buffer size is fixed at 10 Execution commands and 10 Configuration commands.
Example
The following is sample output from the show history command.
Console#show history