User`s manual

User’s Manual 289
Backend State Machine
State Current state (including request, response, success, fail, timeout, idle, initialize).
Request Count Number of EAP Request packets sent to the Supplicant without receiving a
response.
Identifier(Server) Identifier carried in the most recent EAP Success, Failure or Request packet
received from the Authentication Server.
Reauthentication State Machine
State Current state (including initialize, reauthenticate).
Example
The following is sample output from the show dot1x command.
Console#show dot1x Global 802.1X Parameters
reauth-enabled: yes
reauth-period: 3600
quiet-period: 60
tx-period: 30
supp-timeout: 30
server-timeout: 30
reauth-max: 2
max-req: 2
802.1X Port Summary
Port Name Status Operation Mode Mode Authorized
1/1 disabled Single-Host ForceAuthorized n/a
1/2 disabled Single-Host ForceAuthorized n/a
.
.
.
1/47 disabled Single-Host ForceAuthorized n/a
1/48 enabled Single-Host Auto yes
802.1X Port Details
802.1X is disabled on port 1/1
802.1X is disabled on port 1/2
.
.
.
.
802.1X is disabled on port 1/47
802.1X is enabled on port 1/48
Status Authorized
Operation mode Single-Host
Max count 5
Port-control Auto