User`s manual

282 Asanté IntraCore 36000 Series
no rate-limit {input | output}
input Input rate
output Output rate
rate Maximum value in Mbps. (Range: 1 to 1000 Mbps)
Default
1000 Mbps
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
Console(config)#interface ethernet 1/1
Console(config-if)#rate-limit input 600
Console(config-if)#
16.138 reload
This command restarts the system.
Note: When the system is restarted, it runs the Power-On Self-Test. It retains all configuration information
stored in non-volatile memory by the copy running-config startup-config command.
Default
None
Command Mode
Privileged Exec
Usage Guidelines
This command resets the entire system.
Example
This example shows how to reset the switch:
Console#reload
System will be restarted, continue <y/n>? y
16.139 revision
This command configures the revision number for this multiple spanning tree configuration of this switch.
Use the no form to restore the default.