User`s manual

User’s Manual 281
number_of_retries Number of times the switch will try to authenticate logon access via the RADIUS
server. (Range: 1 - 30)
Default
2
Command Mode
Global Configuration
Example
Console(config)#radius-server retransmit 5
Console(config)#
16.136 radius-server timeout
This command sets the interval between transmitting authentication requests to the RADIUS server. Use the
no form to restore the default.
Syntax Description
radius-server timeout number_of_seconds
no radius-server timeout
number_of_seconds Number of seconds the switch waits for a reply before resending a request.
(Range: 1-65535)
Default
5
Command Mode
Global Configuration
Example
Console(config)#radius-server timeout 10
Console(config)#
16.137 rate-limit
This command defines the rate limit for a specific interface. Use this command without specifying a rate to
restore the default rate. Use the no form to restore the default status of disabled.
Syntax Description
rate-limit {input | output} [rate]