User`s manual

276 Asanté IntraCore 36000 Series
Usage Guidelines
A private VLAN provides port-based security and isolation between ports within the VLAN. Data traffic on the
downlink ports can only be forwarded to, and from, the uplink port.
Private VLANs and normal VLANs can exist simultaneously within the same switch.
Entering the pvlan command without any parameters enables the private VLAN. Entering no pvlan disables
the private VLAN.
Example
This example enables the private VLAN, and then sets port 24 as the uplink and ports 1-4 as the downlinks.
Console(config)#pvlan
Console(config)#pvlan up-link ethernet 1/24 down-link ethernet 1/1-4
16.128 queue bandwidth
This command assigns weighted round-robin (WRR) weights to the eight class of service (CoS) priority
queues. Use the no form to restore the default weights.
Syntax Description
queue bandwidth weight1...weight4
no queue bandwidth
weight1...weight4 The ratio of weights for queues 0 - 3 determines the weights used by the WRR
scheduler. (Range: 1 - 15)
Default
Weights 1, 2, 4, 6, 8, 10, 12, 14 are assigned to queues 0 - 7 respectively.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Usage Guidelines
WRR controls bandwidth sharing at the egress port by defining scheduling weights.
Example
This example shows how to assign WRR weights to each of the priority queues:
Console(config)#interface ethernet 1/8
Console(config-if)#queue bandwidth 1 3 5 7 9 11 13 15
Console(config-if)#
Related Commands
show queue bandwidth