User`s manual

274 Asanté IntraCore 36000 Series
16.125 protocol-vlan protocol-group (Configuring Groups)
This command creates a protocol group, or to add specific protocols to a group. Use the no form to remove
a protocol group.
Syntax Description
protocol-vlan protocol-group group-id [{add | remove} frame_type frame
protocol-type protocol]
no protocol-vlan protocol-group group-id
group-id Group identifier of this protocol group. (Range: 1-2147483647)
frame Frame type used by this protocol. (Options: ethernet, rfc_1042, llc_other)
protocol Protocol type. The only option for the llc_other frame type is ipx_raw. The
options for all other frames types include: ip, arp, rarp.
Default
No protocol groups are configured.
Command Mode
Global Configuration
Example
The following creates protocol group 1, and specifies Ethernet frames with IP and ARP protocol types:
Console(config)#protocol-vlan protocol-group 1 add frame-type ethernet
protocol-type ip
Console(config)#protocol-vlan protocol-group 1 add frame-type ethernet
protocol-type arp
Console(config)#
16.126 protocol-vlan protocol-group (Configuring Interfaces)
This command maps a protocol group to a VLAN for the current interface. Use the no form to remove the
protocol mapping for this interface.
Syntax Description
protocol-vlan protocol-group group-id vlan vlan-id
no protocol-vlan protocol-group group-id vlan
group-id Group identifier of this protocol group. (Range: 1-2147483647)
vlan-id VLAN to which matching protocol traffic is forwarded. (Range: 1-4094)