User`s manual

260 Asanté IntraCore 36000 Series
Usage Guidelines
You must configure an ACL mask before you can change frame priorities based on an ACL rule.
Example
Console(config)#interface ethernet 1/12
Console(config-if)#match access-list mac james set priority 0
Console(config-if)#
Related Commands
show marking
16.111 max-hops
This command configures the maximum number of hops in the region before a BPDU is discarded. Use the
no form to restore the default.
Syntax Description
max-hops hop-number
hop-number Maximum hop number for multiple spanning tree. (Range: 1-40)
Default
20
Command Mode
MST Configuration
Usage Guidelines
A MSTI region is treated as a single node by the STP and RSTP protocols. Therefore, the message age for
BPDUs inside a MSTI region is never changed. Each spanning tree instance within a region, and the internal
spanning tree (IST) that connects these instances use a hop count to specify the maximum number of
bridges that propagates a BPDU. Each bridge decrements the hop count by one before passing on the
BPDU. When the hop count reaches zero, the message is dropped.
Example
Console(config-mstp)#max-hops 30
Console(config-mstp)#
16.112 mst priority
This command configures the priority of a spanning tree instance. Use the no form to restore the default.