User`s manual

User’s Manual 245
Default
300 seconds
Command Mode
Global Configuration
Usage Guidelines
Use this command to dynamically delete learned forwarding information after a specified period of time.
Example
Console(config)#mac-address-table aging-time 100
Console(config)#
16.97 mac-address-table static
This command maps a static address to a destination port in a VLAN. Use the no form to remove an
address.
Syntax Description
mac-address-table static mac-address interface interface vlan vlan-id
[action]
no mac-address-table static mac-address vlan vlan-id
mac-address The MAC address.
interface Is ethernet unit/port
unit - This is device 1.
port - Port number.
port-channel channel-id (Range: 1-6)
vlan-id VLAN ID (Range: 1-4094)
Action Specify
delete-on-reset - Assignment lasts until the switch is reset.
permanent - Assignment is permanent
Default
no
The default mode is permanent.