User`s manual

242 Asanté IntraCore 36000 Series
16.92 logging sendmail source-email
This command sets the email address used for the “From” field in alert messages.
Syntax Description
logging sendmail source-email email-address
Email-address The source email address used in alert messages. (Range: 1-41 characters)
Default
None
Command Mode
Global Configuration
Usage Guidelines
You may use a symbolic email address that identifies the switch, or the address of an administrator
responsible for the switch.
Example
This example shows setting to system to send email alerts for system alerts for emails received from a
specific address.
Console(config)#logging sendmail source-email [e-mail]
Console(config)#
16.93 logging trap
This command enables the logging of system messages to a remote server, or limits the syslog messages
saved to a remote server based on severity. Use this command without a specified level to enable remote
logging. Use the no form to disable remote logging.
Syntax Description
logging trap [level]
no logging trap
level One of the level arguments listed in the table under the logging history
command. Messages sent include the selected level up through level 0.
Default
Level 3 - 0
Command Mode
Global Configuration