User`s manual

234 Asanté IntraCore 36000 Series
Default
0
Command Mode
Interface Configuration (Port Channel)
Usage Guidelines
Ports are only allowed to join the same LAG if (1) the LACP system priority matches, (2) the LACP port
admin key matches, and (3) the LACP port channel key matches (if configured).
If the port channel admin key (lacp admin key - Port Channel) is not set when a channel group is formed
(For example, it has the null value of 0), this key is set to the same value as the port admin key (lacp admin
key - Ethernet Interface) used by the interfaces that joined the group. Note that when the LAG is no longer
used, the port channel admin key is reset to 0.
Example
Console(config)#interface port channel 1
Console(config-if)#lacp admin-key 3
Console(config-if)#
16.81 lacp port-priority
This command configures LACP port priority. Use the no form to restore the default setting.
Syntax Description
lacp {actor | partner} port-priority priority
no lacp {actor | partner} port-priority
actor Use this to set the local side an aggregate link.
partner Use this to set the remote side of an aggregate link.
priority Use this to set the LACP port priority to select a backup link. (Range: 0-65535)
Default
32768
Command Mode
Interface Configuration (Ethernet)
Usage Guidelines
Setting a lower value indicates a higher effective priority.