User`s manual

224 Asanté IntraCore 36000 Series
port-channel channel-id (Range: 1-6)
Default
No static multicast router ports are configured.
Command Mode
Global Configuration
Usage Guidelines
Depending on your network connections, IGMP snooping may not always be able to locate the IGMP
querier. Therefore, if the IGMP querier is a known multicast router/switch connected over the network to an
interface (port or trunk) on your router, you can manually configure that interface to join all the current
multicast groups.
Example
The following shows how to configure port 11 as a multicast router port within VLAN 1:
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11
Console(config)#
16.68 ip igmp snooping vlan static
This command adds a port to a multicast group. Use the no form to remove the port.
Syntax Description
[no] ip igmp snooping vlan vlan-id static ip-address interface
vlan-id VLAN ID (Range: 1-4094)
ip-address IP address for multicast group
interface ethernet unit/port
unit - This is device 1.
port - Port number.
port-channel channel-id (Range: 1-6)
Default
None
Command Mode
Global Configuration