User`s manual

User’s Manual 221
16.63 ip igmp snooping query-interval
This command configures the query interval. Use the no form to restore the default.
Syntax Description
ip igmp snooping query-interval seconds
no ip igmp snooping query-interval
seconds The frequency at which the switch sends IGMP host-query messages. (Range:
60-125)
Default
125 seconds
Command Mode
Global Configuration
Example
The following shows how to configure the query interval to 100 seconds:
Console(config)#ip igmp snooping query-interval 100
Console(config)#
16.64 ip igmp snooping query-max-response-time
This command configures the query report delay. Use the no form to restore the default.
Syntax Description
ip igmp snooping query-max-response-time seconds
no ip igmp snooping query-max-response-time
seconds The report delay advertised in IGMP queries. (Range: 5-25)
Default
10 seconds
Command Mode
Global Configuration
Usage Guidelines
The switch must be using IGMPv2 for this command to take effect.