User`s manual

208 Asanté IntraCore 36000 Series
Console(config)#
16.46 interface
This command configures an interface type and enter interface configuration mode. Use the no form to
remove a trunk.
Syntax Description
interface interface
no interface port-channel channel-id
interface ethernet unit/port
unit - This is device 1.
port - Port number.
port-channel channel-id (Range: 1-6)
Vlan vlan-id (Range: 1-4094)
Default
None
Command Mode
Global Configuration
Example
To specify port 24, enter the following command:
Console(config)#interface ethernet 1/24
Console(config-if)#
16.47 interface vlan
This command enters interface configuration mode for VLANs, which is used to configure VLAN parameters
for a physical interface.
Syntax Description
interface vlan vlan-id
vlan-id ID of the configured VLAN. (Range: 1-4094, no leading zeroes)
Default
None