User`s manual

202 Asanté IntraCore 36000 Series
Default
30 seconds
Command Mode
Global Configuration
Example
Console(config)#dot1x timeout tx-period 300
Console(config)#
16.38 enable
This command activates Privileged Exec mode. In privileged mode, additional commands are available, and
certain commands display additional information. See section 14.5 Understanding Command Modes.
Syntax Description
enable [level]
level Privilege level to log into the device. The device has two predefined privilege
levels: 0: Normal Exec, 15: Privileged Exec. Enter level 15 to access Privileged
Exec mode.
Default
Level 15
Command Mode
Normal Exec
Usage Guidelines
The default password required to change the command mode from Normal Exec to Privileged Exec is
super. (To set this password, refer to the enable password command.
The “#” character is appended to the end of the prompt to indicate that the system is in privileged access
mode.
Example
Console>enable
Password: [privileged level password]
Console#
Related Commands
disable
enable password