User`s manual

User’s Manual 201
Default
60 seconds
Command Mode
Global Configuration
Example
Console(config)#dot1x timeout quiet-period 350
Console(config)#
16.36 dot1x timeout re-authperiod
This command sets the period of time before a connected client must be re-authenticated.
Syntax Description
dot1x timeout re-authperiod seconds
no dot1x timeout re-authperiod
seconds The number of seconds. (Range: 1-65535)
Default
3600 seconds
Command Mode
Global Configuration
Example
Console(config)#dot1x timeout re-authperiod 300
Console(config)#
16..37 dot1x timeout tx-period
This command sets the time that the switch waits during an authentication session before re-transmitting an
EAP packet. Use the no form to reset to the default value.
Syntax Description
dot1x timeout tx-period seconds
no dot1x timeout tx-period
seconds The number of seconds. (Range: 1-65535)