User`s manual

User’s Manual 197
Console#disable
Console>
Related Commands
enable
16.28 disconnect
Use this command to terminate an SSH, Telnet, or console connection.
Syntax Description
disconnect session-id
session-id The session identifier for an SSH, Telnet or console connection. (Range: 0-4)
Command Mode
Privileged Exec
Usage Guidelines
Specifying session identifier “0” will disconnect the console connection. Specifying any other identifiers for
an active session will disconnect an SSH or Telnet connection.
Example
The following example show disconnecting session 1.
Console#disconnect 1
Console#
Related Commands
show ssh
show users
16.29 dot1x default
This command sets all configurable dot1x global and port settings to their default values.
Syntax Description
dot1x default
Command Mode
Global Configuration