User`s manual

196 Asanté IntraCore 36000 Series
Usage Guidelines
If you enter the dir command without any parameters, the system displays all files.
File information is shown below:
Column Heading Description
file name The name of the file.
file type File types: Boot-Rom, Operation Code, and Config file.
startup Shows if this file is used when the system is started.
Size The length of the file in bytes.
Example
The following example shows how to display all file information:
Console#dir
file name file type startup size (byte)
-------------------------------- -------------- ------- -----------
Unit1:
Diag.bix Boot-Rom image Y 818812
ES4548C_ZZ(V0.1.0.2).bix Operation Code Y 2346020
Factory_Default_Config.cfg Config File N 374
startup Config File Y 7606
-------------------------------------------------------------------
Total free space: 3932160
Console#
16.27 disable
This command returns to Normal Exec mode from privileged mode. In normal access mode, you can only
display basic information on the switch's configuration or Ethernet statistics. To gain access to all
commands, you must use the privileged mode.
Default
None
Command Mode
Privileged Exec
Usage Guidelines
The “>” character is appended to the end of the prompt to indicate that the system is in normal access
mode.
Example
The following example shows executing the disable command.