User`s manual

User’s Manual 195
Syntax Description
description string
no description
String Comment or a description to help you remember what is attached to this
interface. (Range: 1-64 characters)
Default
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
The following example adds a description to port 24.
Console(config)#interface ethernet 1/24
Console(config-if)#description RD-SW#3
Console(config-if)#
16.26 dir
This command displays a list of files in flash memory.
Syntax Description
dir [boot-rom | config | opcode [:filename]]
The type of file or image to display includes:
boot-rom Boot ROM (or diagnostic) image file.
Config Switch configuration file.
opcode Run- time operation code image file.
filename Name of the file or image. The file is not displayed if the file exists and contains errors.
Default
None
Command Mode
Privileged Exec