User`s manual

192 Asanté IntraCore 36000 Series
\Write to FLASH finish.
Success.
Console#
The following example shows how to download a configuration file:
Console#copy tftp startup-config
TFTP server ip address: 10.1.0.99
Source configuration file name: startup.01
Startup configuration file name [startup]:
Write to FLASH Programming.
\Write to FLASH finish.
Success.
Console#
The following example shows how to copy a secure-site certificate from an TFTP server. It then reboots the
switch to activate the certificate:
Console#copy tftp https-certificate
TFTP server ip address: 10.1.0.19
Source certificate file name: SS-certificate
Source private file name: SS-private
Private password: ********
Success.
Console#reload
System will be restarted, continue <y/n>? y
The following example shows coping a public-key used by SSH from an TFTP server. Note that public key
authentication via SSH is only supported for users configured locally on the switch:
Console#copy tftp public-key
TFTP server IP address: 192.168.1.19
Choose public key type:
1. RSA: 2. DSA: <1-2>: 1
Source file name: asante_start
Username: asante
TFTP Download
Success.
Write to FLASH Programming.
Success.
Console#
16.22 databits
This command sets the number of data bits per character that are interpreted and generated by the console
port. Use the no form to restore the default value.