User`s manual

User’s Manual 185
Related Commands
negotiation
speed-duplex
flowcontrol
16.12 channel-group
This command adds a port to a trunk. Use the no form to remove a port from a trunk.
Syntax Description
channel-group channel-id
no channel-group
channel-id Trunk index (Range: 1-6)
Default
The current port will be added to this trunk.
Command Mode
Interface Configuration (Ethernet)
Usage Guidelines
When configuring static trunks, the switches must comply with the Cisco EtherChannel standard.
Use no channel-group to remove a port group from a trunk.
Use no interfaces port-channel to remove a trunk from the switch.
Example
The following example creates trunk 1 and then adds port 11:
Console(config)#interface port-channel 1
Console(config-if)#exit
Console(config)#interface ethernet 1/11
Console(config-if)#channel-group 1
Console(config-if)#
16.13 clear counters
This command clears statistics on an interface.
Syntax Description
clear counters interface