User`s manual

User’s Manual 179
Default
Default system mask: Filter inbound packets according to specified MAC ACLs.
Command Mode
Global Configuration
Usage Guidelines
You must configure a mask for an ACL rule before you can bind it to a port or set the queue or frame
priorities associated with the rule.
A mask can only be used by all ingress ACLs or all egress ACLs.
The precedence of the ACL rules applied to a packet is not determined by order of the rules, but instead by
the order of the masks; For example, the first mask that matches a rule will determine the rule that is applied
to a packet.
Example
The following is sample output from the access-list command with the mac mask-precedence argument.
Console(config)#access-list mac mask-precedence in
Console(config-mac-mask-acl)#
Related Commands
mask (MAC ACL)
mac access-group
16.5 authentication dot1x default
This command sets the default authentication server type. Use the no form to restore the default.
Syntax Description
authentication dot1x default radius
no authentication dot1x
Default
RADIUS
Command Mode
Global Configuration
Example
The following is sample output from the authentication command with the dot1x argument.
Console(config)#authentication dot1x default radius