User`s manual

170 Asanté IntraCore 36000 Series
Configuring Protocol
VLANs
Configures protocol-based VLANs based on frame type and protocol
15.14.1 Editing VLANs
The following table list the commands for editing VLAN groups.
Command Function Mode
vlan database Enters VLAN database mode to add, change, and delete VLANs GC
vlan Configures a VLAN, including VID, name and state VC
15.14.2 Configuring VLAN Interfaces
Command Function Mode
Interface vlan Enters interface configuration mode for a specified VLAN IC
switchport mode Configures VLAN membership mode for an interface IC
switchport acceptable-frame-
types
Configures frame types to be accepted by an interface IC
switchport ingress-filtering Enables ingress filtering on an interface IC
switchport native vlan Configures the PVID (native VLAN) of an interface IC
switchport allowed vlan Configures the VLANs associated with an interface IC
switchport gvrp Enables GVRP for an interface IC
switchport forbidden vlan Configures forbidden VLANs for an interface IC
15.14.3 Displaying VLAN Information
The following table lists the commands need to show VLAN information.
Command Function Mode
show vlan Shows VLAN information NE, PE
show interfaces status
vlan
Displays status for the specified VLAN interface NE, PE
show interfaces
switchport
Displays the administrative and operational status of an interface NE, PE
15.14.4 Configuring Private VLANs
Private VLANs provide port-based security and isolation between ports within the assigned VLAN. This
section describes commands used to configure private VLANs.