User`s manual

User’s Manual 169
mst vlan Adds VLANs to a spanning tree instance MST
mst priority Configures the priority of a spanning tree instance MST
Name Configures the name for the multiple spanning tree MST
Revision Configures the revision number for the multiple spanning tree MST
max-hops Configures the maximum number of hops allowed in the region
before a BPDU is discarded
MST
spanning-tree spanning-
disabled
Disables spanning tree for an interface IC
spanning-tree cost Configures the spanning tree path cost of an interface IC
spanning-tree port-priority Configures the spanning tree priority of an interface IC
spanning-tree edge-port Enables fast forwarding for edge ports IC
spanning-tree portfast Sets an interface to fast forwarding IC
spanning-tree link-type Configures the link type for RSTP/MSTP IC
spanning-tree mst cost Configures the path cost of an instance in the MST IC
spanning-tree mst port-
priority
Configures the priority of an instance in the MST IC
show spanning-tree Shows spanning tree configuration for the common spanning tree
(For example, overall bridge), a selected interface, or an instance
within the multiple spanning tree
PE
show spanning-tree mst
configuration
Shows the multiple spanning tree configuration PE
15.14 VLAN Commands
A VLAN is a group of ports that can be located anywhere in the network, but communicate as though they
belong to the same physical segment. This section describes commands used to create VLAN groups, add
port members, specify how VLAN tagging is used, and enable automatic VLAN registration for the selected
interface.
Command Groups Function
Editing VLAN Groups Sets up VLAN groups, including name, VID and state
Configuring VLAN
Interfaces
Configures VLAN interface parameters, including ingress and egress tagging
mode, ingress filtering, PVID, and GVRP
Displaying VLAN
Information
Displays VLAN groups, status, port members, and MAC addresses
Configuring Private
VLANs
Configures private VLANs, including uplink and downlink ports