User`s manual

154 Asanté IntraCore 36000 Series
Secure Shell Provides secure replacement for Telnet
Event Logging Controls logging of error messages
SMTP Alerts Configures SMTP email alerts
Time (System Clock) Sets the system clock automatically via NTP/SNTP server or manually
System Status Displays system configuration, active managers, and version information
Frame Size Enables support for jumbo frames
15.3.1 Device Designation Commands
The following table lists the device designation commands and describes the functions and command
modes of each command.
Command Function Mode
Prompt Customizes the prompt used in PE and NE mode GC
hostname Specifies the host name for the switch GC
snmp-server contact Sets the system contact string GC
snmp-server location Sets the system location string GC
15.3.2 User Access Commands
The basic commands required for management access are listed in this section. This switch also includes
other options for password checking through the console or a Telnet connection, user authentication through
a remote authentication server and host access authentication for specific ports.
The following table lists the user access commands and describes the functions and command modes of
each command.
Command Function Mode
Username Establishes a user name-based authentication system at login GC
Enable password Sets a password to control access to the Privileged Exec level GC
15.3.3 IP Filter Commands
The following table lists the filter commands and describes the functions and command modes of each
command.
Command Function Mode
management Configures IP addresses that are allowed management access GC
show management Displays the switch to be monitored or configured from a browser PE