User`s manual

User’s Manual 153
disable Returns to normal mode from privileged mode PE
configure Activates global configuration mode PE
show history Shows the command history buffer NE, PE
reload Restarts the system PE
end Returns to Privileged Exec mode any config.
mode
exit Returns to the previous configuration mode, or exits the CLI any
quit Exits a CLI session NE, PE
help Shows how to use help any
? Shows options for command completion (context sensitive) any
15.2.1 Flash/File Commands
These commands are used to manage the system code or configuration files.
Command Function Mode
copy Copies a code image or a switch configuration to or from flash
memory or a TFTP server
PE
delete Deletes a file or code image PE
dir Displays a list of files in flash memory PE
whichboot Displays the files booted PE
boot system Specifies the file or image used to start up the system GC
15.3 System Management Commands
Use these commands to control system logs, passwords, user names, browser configuration options, and
display or configure a variety of other system information.
The following table lists the system management commands and describes the functions of each command.
Command Group Function
Device Designation Configures information that uniquely identifies this switch
User Access Configures the basic user names and passwords for management access
IP Filter Configures IP addresses that are allowed management access
Web Server Enables management access via a Web browser