User`s manual

User’s Manual 145
CLI
This example sets a default domain name and a domain list. If a domain list is specified, the default domain
name is not used.
Console(config)#ip domain-name sample.com
Console(config)#ip domain-list sample.com.uk
Console(config)#ip domain-list sample.com.jp
Console(config)#ip name-server 192.168.1.55 10.1.0.55
Console(config)#ip domain-lookup
Console(config)#end
Console#show dns
Domain Lookup Status:
DNS enabled
Default Domain Name:
sample.com
Domain Name List:
sample.com.uk
sample.com.jp
Name Server List:
192.168.1.55
10.1.0.55
Console#
13.2 Static DNS Host to Address Entries
You can manually configure static entries in the DNS table that are used to map domain names to IP
addresses.
13.2.1 Guidelines
Static entries may be used for local devices connected directly to the attached network, or for commonly
used resources located elsewhere on the network.
Servers or other network devices may support one or more connections via multiple IP addresses. If more
than one IP address is associated with a host name in the static table or via information returned from a
name server, a DNS client can try each address in succession, until it establishes a connection with the
target device.