User`s manual

116 Asanté IntraCore 36000 Series
Status – Shows if this VLAN is enabled or disabled.
• Active: VLAN is operational.
• Suspend: VLAN is suspended; For example, does not pass packets.
Ports / Channel groups – Shows the VLAN interface members.
CLI
Current VLAN information can be displayed with the following command.
Console#show vlan id
VLAN Type Name Status Ports/Channel groups
---- ------- ----------- ------ ------------------------------------
1 Static DefaultVlan Active Eth1/1 Eth1/2
Console#
10.1.5 Creating VLANs
Use the VLAN Static List to create or remove VLAN groups. To propagate information about VLAN groups
used on this switch to external network devices, you must specify a VLAN ID for each of these groups.
Command Attributes
Current – List all the current VLAN groups created for this system. Up to 255 VLAN groups can be defined.
VLAN 1 is the default untagged VLAN.
New – Specify the name and numeric identifier for a new VLAN group. (The VLAN name is only used for
management on this system; it is not added to the VLAN tag.)
VLAN ID – ID of configured VLAN (1-4094, no leading zeroes).
VLAN Name – Name of the VLAN (1 to 32 characters).
Status (Web) – Enable or disable the specified VLAN.
• Enable: VLAN is operational.
• Disable: VLAN is suspended; For example, does not pass packets.
State (CLI) – Enable or disable the specified VLAN.
• Active: VLAN is operational.
• Suspend: VLAN is suspended; For example, does not pass packets.
Add – Add a new VLAN group to the current list.
Remove – Remove a VLAN group from the current list. If any port is assigned to this group as untagged, it is
reassigned to VLAN group 1 as untagged.