Setup guide

Asanté IntraCore 35516 Series Switches

Appendix A Basic Troubleshooting

In the unlikely event that your network does not operate properly,

follow the troubleshooting tips below:

1. CHECK YOUR POWER CONNECTION. Is the Power LED on?

If not, plug the power cord into another known working AC out-

let.

2. CHECK YOUR NETWORK CABLES. Are the LINK LEDs on? If

not, check the cable connections. Are the connectors seated

correctly in each port? Make sure that the correct type of cable

is connected to each port.

3. CHECK YOUR GBIC CONNECTORS. Are the cables inserted

correctly? The receiving and transmitting plugs must be in-

serted into their respective receptacles correctly in order to es-

tablish a link.

See the Troubleshooting section of the User’s Manual for more de-

tailed information.