Setup guide

20
Setup Guide
•
Open the HyperTerminal program, and from its file menu,
right-click on
Properties
•
Under the Connect To tab, choose the appropriate COM
port (such as COM1 or COM2)
•
Under the Settings tab, choose VT100 for Emulation
mode
•
Select Terminal keys for Function, Arrow, and Ctrl keys.
Be sure the setting is for Terminal keys, NOT Windows
keys
•
Back under the Connect To tab, press the Configuration
button
•
Set the data rate to 9600 Baud
•
Set data format to 8 data bits, 1 stop bit and no parity
•
Set flow control to NONE
Now that terminal is set up correctly, power on the switch (boot se-
quence will display in terminal).