Setup guide

10
Setup Guide
1.5 Management and Configuration
The switch is managed using Command Line Interface (CLI) in or-
der to access several different command modes. Each command
mode provides a group of related commands. Refer to the User’s
Manual on the accompanying CD-ROM for more information.
Console Interface
Support for local, out-of-band management is delivered through a
terminal or modem attached to the EIA/TIA-232 interface. Users can
access the switch by connecting a PC or terminal to the console
port of the switch, via a serial cable. The switch is shipped with a
default password
Asante
set on the console line (the password is
case-sensitive), and a default IP address of 192.168.0.1/24. The
default settings for the terminal emulation program are as follows:
9600-8-N-1
Remote in-band management is available through Simple Network
Management Protocol (SNMP) and Telnet client. When connecting
via a Telnet session (line vty0) the default password is also Asante
(case-sensitive).
See the User’s Manual for configuration information.