Setup guide

23
Asanté IntraCore 35160 Series Layer 2 Gigabit Switches
Appendix A Troubleshooting
In the unlikely event that your network does not operate properly,
follow the troubleshooting tips below:
1. CHECK YOUR POWER CONNECTION. Is the Power LED on?
If not, plug the power cord into another known working AC out-
let.
2. CHECK YOUR NETWORK C ABLES. Are the LINK LEDs on? If
not, check the cable connections. Are the connectors seated
correctly in each port? Make sure that the correct type of cable
is connected to each port.
3. CHECK YOUR GBIC CONNECTORS. Are the cables inserted
correctly? The receiving and transmitting plugs must be in-
serted into their respective receptacles correctly in order to
establish a link.
See the Troubleshooting section of the User’s Manual (CD-ROM)
for more detailed information.