Setup guide

Setup Guide

Note: This switch has no uplink port. All 10/100/1000 ports on this

switch are auto-sensing MDI/MDI-X. This advanced feature means

that the 10/100/1000 ports will automatically determine whether the

device at the other end of the link is a hub, switch, or workstation,

and adjust its signals accordingly.

Although 10BaseT requires only pins 1, 2, 3, and 6, Asanté strongly

recommends cables with all 8 pins wired as shown in the following

table.

1000BaseT DOES require that all four pairs (8 wires) be connected

correctly. The following table shows the correct pairing of all eight

wires.

WH/BR

WH/BL

WH/GR

WH/OR

Pin Number Pair Number & Wire Colors

1 2 White/Orange

2 2 Orange/White

3 3 White/ Green

4 1 Blue/White

5 1 White/Blue

6 3 Green/White

7 4 White/Brown

8 4 Brown/White