Setup guide

18
IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit
5.2 Direct Access
Direct access to the switch console is achieved by connecting the null-modem cable to the switch’s console port to a
VT-100 or compatible terminal or to a PC, Apple Macintosh, or UNIX workstation equipped with a terminal-emulation
program. The following list provides examples of terminal-emulation programs:
• HyperTerminal (which is built into the Microsoft Windows operating systems)
• ZTerm (Apple Macintosh)
• TIP (UNIX workstation)
Follow these steps to set up the connection. Note; the graphics in this example show the HyperTerminal on a PC.
1. Click the Start button.
2. Select Accessories and then Communications.
3. Select HyperTerminal
The following screen appears.
1. Enter a name for this connection.
2. Click OK
The following screen appears.
1. In the drop down box labeled Connect Using:, click the arrow and choose the desired COM port. (In the example
below, COM1 is the port selected.)
2. Click OK.