Installation guide

2
Installation
Installation Overview
Installation involves installing the Hub and its software to configure and run
it. This chapter describes the parts of the Hub and how to make the Hub
operational.
Hub Components
The Front Panel
The following figure shows the components on the front panel of the
AsantéHub 1016-IQ. The components are explained below.
Field/Definition
RS-232 Port
❏ An RS-232 connector allows the connection of RS-232 cable for out-of-band
network management.
AUI Port
❏ A D-type female connector allows the connection of a thick Ethernet cable
network to the hub.
❏ Note: The SQE (Signal Quality Error) test function will not be performed by
MAU (Media Access Unit) which are connected to the hub.