Installation guide

A
Specifications
Interface Connections
❏ RS-232 (DB-25) connections for the hub console
❏ 16 RJ-45, 1 AUI and 1 BNC
❏ AMS
LEDs
❏ 3 LEDs indicate status of power, carrier sense, and colli-
sion detection
❏ Each port LED indicates the linking status of each of the
16 RJ-45 ports.
Terminator Type
❏ Selectable BNC internal or external terminator
Power Requirements
❏ 115- 230 volts AC
❏ 50to 60 Hz frequency
❏ 30 watts consumption
Environmental Conditions
❏ Temperature: 0
o
C to 30
o
C
❏ Relative Humidity: Up to 95% non-condensing
Size
❏ Dimensions: 44.3 x 19 x 4.5 cm (L x W x H)
❏ Weight: 2.2 KG
Standards Compliance
❏ IEEE 802.3 (Hub Management Standard)
❏ IEEE 802.3 repeater MIB (RFC1368) and the Common
MIB II
❏ IEEE 802.3 10BASE-T standard for 10 Mbps UTP
Ethernet
❏ SNMP (Simple Network Management Protocol)
❏ FCC Part 15J Class A