Installation guide

Page 2-3
Hub Components
The Rear Panel
The following figure shows the components on the rear panel of the
AsantéHUB. The components are explained below.
Field/Definition
AC Power Switch
❏ The power switch is used to turn the power on and off.
AC Power Socket
❏ The socket is used to hold the power cord that connects the hub to the wall
AC power outlet.
AMS Switch
❏ The switch labeled AMS is used to terminate the AMS link.
Front Panel Switch
❏ The switch labeled Front Panel is used to select the type of RS-232 device that
is connected to the front panel.