User`s manual

Installation
Page 2-10
Connecting a Hub or a Switch to the Asanté Switch
❑ Use a two-pair Category 5 UTP straight-through cable with RJ-45
connectors
❑ Connect the hub’s uplink port to any of the Switch’s ports. See
Figure 2-13
Figure 2-13 Connecting a hub to the Switch
Connecting a Hub with no Uplink Port to the Switch
If a hub is not equipped with an uplink port, connection can be made using
straight-through cable, as outlined below. The uplink button must be
depressed. See Figure 2-14
Figure 2-14 Connecting a hub without an uplink port to the Switch
straight-through cable
Hub’s uplink port
100Mbps
Partition
100Mbps Link/Receive
1234567 8
Switched 10/100Mbps Ports
FH8DS
FriendlyNet
Uplink
or
Stackable 8-port Dual Speed Ethernet Hub
1234578
Power
FS4008E
FriendlyNet
8-port 10/100 Fast Ethernet Switch
Uplink
or
Power
Switched 10/100Mbps Ports
1234 5 678
12345678
FS4008E
Hub
Straight-through network cable
100Mbps
Partition
100Mbps Link/Receive
1234567
Switched 10/100Mbps Ports
FH8DS
FriendlyNet
Stackable 8-port Dual Speed Ethernet Hub
1234578
Power
FS4008E
FriendlyNet
8-port 10/100 Fast Ethernet Switch
Uplink
or
Power
Switched 10/100Mbps Ports
1234 5 678
123456 78
FS4008E Switch
Hub
Straight-through network cable