Setup guide

8
Setup Guide
network via your web browser. Just click your mouse instead of typ-
ing command strings. However, the switch can also be managed via
Telnet, Console, or SNMP Management.
Features
•
Conforms to IEEE 802.3, 802.3u, and 802.3x Ethernet Stan-
dards
•
8x auto-sensing 10/100Mbps Ethernet RJ-45 ports
•
Automatic MDI/MDIX crossover for each 10BaseT/100BaseTX
port
•
FM2009 only: 1 fixed 100Mbps fiber port (SC/SC single-mode/
MT-RJ/VF-45 connector)
•
Half-duplex mode for backpressure, and full-duplex for flow
control
•
Store-and-forward switching architecture for abnormal packet
filtering
•
Automatic address learning, address migration
•
8K-entry MAC address table
•
2Mbit memory buffer sharing
•
Performs non-blocking full wire speed LED-indicators for
Power, 100Mbps, Link/Activity, Full Duplex
•
10-inch desktop-sized design
Please refer to the User’s Manual (CD-ROM) for a more complete
list of management features.
Package Contents
Unpack the contents of the switch and verify them against the
following checklist:
•
Switch
•
Power Cord
•
Rack Mount Kit
•
Four Rubber Feet
•
RS-232 Cable
•
Setup Guide (this document)