User`s manual

Installation
Page 2-6
Wall Mounting the FriendlyNet Hub
The FriendlyNet Fast Ethernet Hub can be mounted to a wall or to the
surface of a countertop using the screws included with the hub.
To mount the hub to a wall or countertop:
1 Screw one of the enclosed 1/2-inch screws into a
wall (or countertop), leaving approximately 1/4
inch of the screw’s threads exposed.
2 Align the other screw with the first screw, leaving
approximately 2 inches between the two.
3 Screw the second screw into the wall/countertop.
4 Line up the keyholes on the bottom of the hub with
the mounted screws.
5 Hang or place the hub on the screws. See
Figure 2-5.
Figure 2-5 Wall-mounting a FriendlyNet Fast Ethernet Hub