Installation guide

Page 1-2
Introduction
Features
❏ Operates in Plug-and-Play, Jumperless, or Jumper mode
❏ Support for 8- and 16-bit expansion slots
❏ Provides UTP/BNC/AUI ports to comply with IEEE 802.3
10BASE-2, 10BASE-5 and 10BASE-T standard
❏ Fully compatible with Novell’s NE2000 Ethernet adapter
❏ Provides drivers for popular Network Operating Systems
including Novell’s NetWare, Microsoft Windows 95, Win-
dows NT, LAN Manager, Windows for Workgroups, and
FTP PC/TCP
❏ On-board 16KB RAM for higher performance
❏ On-board Boot ROM socket for diskless workstations
❏ Conforms to Plug-and-Play ISA specifications
❏ Full duplex design to double the performance to
20Mbps
❏ Auto-setup of IRQ and I/O address even with non-Plug-
and-Play systems
❏ Media type auto detection
❏ Provides diagnostic software and LEDs to indicate net-
work activity
Package Contents
Please make sure that you have the following items in this package:
❏ EtherPaC 2000+ Ethernet adapter
❏ This installation guide
❏ One driver diskette
❏ One T-connector
❏ One registration card
EPaC 205-01A Book Page 2 Wednesday, October 15, 1997 3:40 PM